Educational Zone #94 - Product Evaluation - Magnalube-G Grease

The Box O' Truth - Educational Zone - Buick O' Truth - Low Light Essentials - Curios & Relics - Forums

Tman - Bio - Disclaimer - Safety Rules - Newsletter - Donations - Advertising - Links - Contact - Use - Privacy - Sitemap

Educational Zone #94 - Product Evaluation - Magnalube-G Grease - Page 2

Again, I spread it out evenly with my finger.

Only a very small amount is needed.

If you put too much, it will just be wiped away and although it does no real harm, it is unnecessary.

The Magnalube-G is a green color, but as the engineer I spoke with told me, "If you can see the color, you are probably using too much."

Of course, this is an advantage for us as customers, as a little will go a very long way.

A tube will last most shooters a long time.

I spread it around slightly and then reassemble the pistol.

I rack the slide a few times to spread the grease out evenly and then wipe off any excess, which may appear at the rear of the slide.

On my AR15, I used a small amount on the bolt locking lugs.

Once again, I spread it out evenly with my finger.

And also a small amount on the hammer where it rides on the bolt carrier.

I run the bolt and bolt carrier "wet" with lubricating oil and have had very good success with that system.